Adjusting Size via the Plunge Screw
Location: There is a lunge screw located below the first wheel at the front of the roller skate.
Steps: Use a tool (such as a screwdriver) to unscrew the lunge screw.
After unscrewing the screw, tighten the skate body and adjust it to the appropriate position according to your foot size.
After adjustment, tighten the lunge screw again to ensure the skate is securely fixed.
Adjusting Size via the Button on the Heel
Location: There is a button located above the last wheel on the heel of the roller skate.
Steps: Press the button.
While holding the button down, pull the skate body to adjust it according to your foot size.
Operation: Once adjusted to the appropriate size, release the button; the skate will be locked in the adjusted position.
Precautions:
Before adjusting the size, ensure you are wearing protective gear, such as knee pads, elbow pads, and a helmet, to prevent accidents during the adjustment process.
Adjust the size appropriately; avoid making it too tight or too loose, as this may affect the skating experience and safety.
If you are unfamiliar with the operation, it is recommended to refer to the inline skates' instruction manual or seek help from a professional.
